STUDY OF DRILL STRING OPERATION DYNAMICS WHEN DRILLING WELLS FROM FLOATING DRILLING RIG
Keywords:
drill string, longitudinal vibrations, heave motion compensator, floating drilling rig, simulation model, Modelica.Abstract
The article deals with the development of the mathematical model of longitudinal vibrations of the system “Floating drilling rig – heave motion compensator – drill string – drill bit” when drilling vertical wells with the help of the three-cone drill bit under the conditions of the sea irregular waves. The numerical model was developed in the environment of the multiphysics modeling and numerical experiments were conducted on the basis of the developed mathematical model and scripting language of the Modelica physical systems. Using the results of the experiments, we made the conclusions on the specifics of the drill string operation dynamics when drilling a well in the sea and nature of the influences of vibrations caused by the error of the heave motion compensator on the longitudinal vibrations of the drill string cross-sections and drill bit operation.
Downloads
References
2 Hatleskog J. T., Dunnigan M. W. Heave Compensation Simulation for Non-Contact Operations in Deep Water // OCEANS 2006 – 2006. – C. 1-6.
3 Hatleskog J. T., Dunnigan M. W. Passive compensator load variation for deep-water drilling // IEEE Journal of Oceanic Engineering – 2007. – T. 32, № 3. – C. 593-602.
4 Hatleskog J. T., Dunnigan M. W. An impedance approach to reduce the contactinstability whilst drilling with active heave compensation // Ocean Engineering. – 2012. –T. 49, № 0. – C. 25-32.
5 Niedzwecki J. M., Thampi S. K. Heave compensated response of long multi-segment drill strings // Applied Ocean Research. – 1988. – T. 10, № 4. – C. 181-190.
6 Векерик В. И. Совершенствование технологии углубления скважин изменением динамики работы бурильного инструмента: Дис. докт. техн. наук: 05.15.10 / Векерик Василий Иванович, Ивано-Франковский институт нефти и газа. – Ивано-Франковск, 1991. – 749 с.
7 Мойсишин В. М. Основи механіки бурильної колони при поглиблені свердловин роторним способом: Дис. докт. техн. наук: 05.15.10 / Мойсишин Василь Михайлович. – Івано-Франківськ, 1996. – 498 с.
8 Слабий О. О. Побудова математичної моделі компенсатора вертикальних переміщень бурильної колони підкронблочного типу // Розвідка та розробка нафтових і газових родовищ. – 2014. – № 3(52). – C. 88-100.
.png)
1.png){kind=logo}
