IMPROVEMENT OF THE MATHEMATICAL MODEL OF THE SINGLE-SUPPORT NON-DIRECTIONAL BOTTOM-HOLE ASSEMBLIES

Authors

  • І. І. Чудик

Keywords:

drill string, designing, force, axis, resistance, well

Abstract

The article deals with the important issues of increasing technical and economical parameters of oil and gas wells drilling by improving facilities and scientific and methodological bases of their design and choice. The influence of structural parameters of non-directional bottom-hole assemblies on the static characteristics of its interaction with the well bottom hole and walls has been characterized. International experience in solving different issues concerning design, selection, and operation of the non-directional bottom-hole assemblies with one supporting and centering element has been analyzed. In addition, the main approaches and techniques, used for designing of non-directional bottom-hole assemblies with one centralizer, and criteria that are essential when choosing them for different tasks of directional drilling have been determined. The process of impact on the static characteristics of interaction of such non-directional bottom-hole assembly elements as spindle shaft and bottomhole engine has been studied. The results of the analytical studies on the example of single-support constructions of the assemblies have shown that taking into account in the analytical scheme the interaction of the bottom-hole assembly with the well bottom hole and walls, its different-in-size elements, notwithstanding their length, weight, and bending stiffness, influence the static characteristics of their interaction with the borehole walls, in particular deflecting force on the bit, its deflection angle and pressing force of the centering elements to the walls of the well.

References

1Гречин Е. Г. Разработка и исследование методов проектирования и работы неориентируемых компоновок низа бурильной колонны:автореф. дис. на соиск. науч. ст. д–ра технических наук: спец. 25.00.15. “Технология бурения и освоения скважин” / Е. Г. Гречин, Тюмень: Тюменский государственный нефтегазовый университет. – Тюмень, 2009. – 47 с.
2 Григулецкий В. Г. Проектирование компоновок нижней части бурильной колонны [Текст] / В. Г. Григулецкий, В. Т. Лукьянов. – М.: Недра, 1990. – 304 с.
3 Чудик І. І. Вплив кривизни стовбура свердловини на статичні форми рівноваги неорієнтованих КНБК / І. І. Чудик, А. А. Козлов // Науковий вісник ІФНТУНГ. – 2006. – № 1(13). –С. 50-54.
4 Калинин А.Г. Бурение наклонных и горизонтальных скважин. / [А. Г. Калинин,Б. А. Никитин, К. М. Солодкий, Б. З. Султанов].– М.: Недра, 1997. – 651 с.
5 Султанов Б. З. Работа бурильной колонны в скважине / Б. З. Султанов, Е. И. Ишемгужин, М. Х. Шаммасов, В. Н. Сорокин. – М.: Недра, 1973. – 217 с.
6 Івасів В. М. Розрахунок компоновок низу бурильної колони (КНБК) з двома центраторами / [В. М. Івасів, І. І. Чудик, А. В. Козлов , В. Г. Глушич] // Науковий вісник ІФНТУНГ. – 2002. – № 2(3). – С. 15 – 16.
7 Крижанівський Є. І. Експериментальні дослідження на моделях компоновок низу бурильної колони / Є.І. Крижанівський, І.І. Чудик, М.М. Яворський, В.М. Івасів // Розвідка та розробка нафтових і газових родовищ. – 2003. – № 4(9). – С. 121 – 123.

Published

10.02.2013

How to Cite

Чудик, І. І. (2013). IMPROVEMENT OF THE MATHEMATICAL MODEL OF THE SINGLE-SUPPORT NON-DIRECTIONAL BOTTOM-HOLE ASSEMBLIES. Oil and Gas Power Engineering, (2(20), 61–69. Retrieved from https://nge.nung.edu.ua/index.php/nge/article/view/223

Issue

Section

PHYSICAL-TECHNICAL PROBLEMS OF ENERGY CARRIERS RECOVERY

Most read articles by the same author(s)

1 2 > >>