THE ANALYSIS OF THE FIBERGLASS, CARBON-PLASTIC AND HYBRID SUCKER RODS EFFICIENCY
Keywords:
fiberglass, hybrid sucker rod, cyclic stretching, stress, ultimate strength, cyclic bending.Abstract
The prospects for the use of the carbon-plastic and hybrid sucker rods for the deep-well oil production are considered and the evaluation of the fatigue strength of hybrid sucker rods as compared with fiberglass rods during cyclic stretching and bending is conducted. The obtained results represent a practical interest for the rod columns strength assessment and can be used to predict the resource at the multi-cycle fatigue.
Downloads
Download data is not yet available.
References
1 http://www.alrdc.com/workshops/papers/ VectorRod™: Carbon Fiber Sucker Rod. Hugh Q. Cook, Jr., Partner and CTO, VectorSum, Inc. –10 p.
2 http://www.compositesworld.com/articles/market-outlook-surplus-in-carbon-fibers-future
3 http://www.edmunds.com/car-news/bmwtoexpand-use-of-carbon-fiber-beyond-i-and-mcars.html
4 T. Tsukizoe, et. al. Wear Mechanism of Unidirectionally Oriented Fiber reinforced Plastics // ASME Journal of Lubrication Technology. –October, 1977.
5 A. Sharma. Study of Wear Pattern Behavior of Aluminum and Mild Steel Discs Using Pin on Disc Tribometer // European Journal of Applied Engineering and Scientific Research. – 2013.
6 R Wang et. al. Polymer Matrix Composites and Technology // Woodhead Publishing Series in Composites Science and Engineering, р. 66.
7 A.P. Mouritz. Design Dilemma For ZPinned Composite Structures // 27th International Congress Of The Aeronautical Sciences, ICAS.
8 American Petroleum Institute, API 11B Specification for Sucker Rods, Polished Rods and Liners, Couplings, Sinker Bars, Polished Rod Clamps, Stuffing Boxes, and Pumping Tees, 27 th edition, May 2010.
9 http://www.doverals.com/theta/en/gn/resources/download/rodstar-d-fix-list, entry for 3.6.2, April 17, 2014.
10 http://www.leeda-pallettruck.com 11 N. Kar, Y. Hu, E. Barjasteh and S. Nutt Tension-tension fatigue of hybrid composite rods, Composites A 43 2115-2124 2012) DOI http://dx.doi.org/10.1016/j.compositesb.2012.03.006
12 NK Kar, E Barjasteh, EJ Bosze and SR Nutt. Bending fatigue of hybrid composite rods, Composites A 42 (2011) 328-336 DOI http://dx.doi.org/10.1016/j.compositesa.2010.12.012
13 S. Barre, M.L. Benzeggagh. On the use of acoustic emission to investigate damage mechanisms in glass–fibre reinforced polypropylene // Comp Sci Technol, 52 (1994), pp. 369–376.
14 W.H. Prosser, K.E. Jackson, S. Kellas, B.T. Smith, J. Mackeon, A. Friedman. Advanced waveform-based acoustic emission detection of matrix cracking in composites // Mater Eval (1995), pp. 1052–1058.
15 I.M. De Rosa, C. Santulli, F. Sarasini. Acoustic emission for monitoring the mechanical behaviour of natural fibre composites: a literature review // Composites: Part A (2009), pp. 1456–1469.
16 J. Awerbuch, M.R. Gorman, M. Madhukar, Monitoring acoustic emission during quasi-static loading–unloading cycles of filament wound graphite epoxy laminate coupons // Mater Eval, 43 (1985), p. 754.
17. Y.A. Dzenis. Cycle based analysis of damage and failure in advanced composites under fatigue. Experimental observation of damage
development within loading cycles // Int J Fatigue, 25 (2003), pp. 499–510.
2 http://www.compositesworld.com/articles/market-outlook-surplus-in-carbon-fibers-future
3 http://www.edmunds.com/car-news/bmwtoexpand-use-of-carbon-fiber-beyond-i-and-mcars.html
4 T. Tsukizoe, et. al. Wear Mechanism of Unidirectionally Oriented Fiber reinforced Plastics // ASME Journal of Lubrication Technology. –October, 1977.
5 A. Sharma. Study of Wear Pattern Behavior of Aluminum and Mild Steel Discs Using Pin on Disc Tribometer // European Journal of Applied Engineering and Scientific Research. – 2013.
6 R Wang et. al. Polymer Matrix Composites and Technology // Woodhead Publishing Series in Composites Science and Engineering, р. 66.
7 A.P. Mouritz. Design Dilemma For ZPinned Composite Structures // 27th International Congress Of The Aeronautical Sciences, ICAS.
8 American Petroleum Institute, API 11B Specification for Sucker Rods, Polished Rods and Liners, Couplings, Sinker Bars, Polished Rod Clamps, Stuffing Boxes, and Pumping Tees, 27 th edition, May 2010.
9 http://www.doverals.com/theta/en/gn/resources/download/rodstar-d-fix-list, entry for 3.6.2, April 17, 2014.
10 http://www.leeda-pallettruck.com 11 N. Kar, Y. Hu, E. Barjasteh and S. Nutt Tension-tension fatigue of hybrid composite rods, Composites A 43 2115-2124 2012) DOI http://dx.doi.org/10.1016/j.compositesb.2012.03.006
12 NK Kar, E Barjasteh, EJ Bosze and SR Nutt. Bending fatigue of hybrid composite rods, Composites A 42 (2011) 328-336 DOI http://dx.doi.org/10.1016/j.compositesa.2010.12.012
13 S. Barre, M.L. Benzeggagh. On the use of acoustic emission to investigate damage mechanisms in glass–fibre reinforced polypropylene // Comp Sci Technol, 52 (1994), pp. 369–376.
14 W.H. Prosser, K.E. Jackson, S. Kellas, B.T. Smith, J. Mackeon, A. Friedman. Advanced waveform-based acoustic emission detection of matrix cracking in composites // Mater Eval (1995), pp. 1052–1058.
15 I.M. De Rosa, C. Santulli, F. Sarasini. Acoustic emission for monitoring the mechanical behaviour of natural fibre composites: a literature review // Composites: Part A (2009), pp. 1456–1469.
16 J. Awerbuch, M.R. Gorman, M. Madhukar, Monitoring acoustic emission during quasi-static loading–unloading cycles of filament wound graphite epoxy laminate coupons // Mater Eval, 43 (1985), p. 754.
17. Y.A. Dzenis. Cycle based analysis of damage and failure in advanced composites under fatigue. Experimental observation of damage
development within loading cycles // Int J Fatigue, 25 (2003), pp. 499–510.
Downloads
Published
15.10.2017
How to Cite
Копей, Б. В., Шуанжуй, Ю. .-., & Стефанишин, А. Б. (2017). THE ANALYSIS OF THE FIBERGLASS, CARBON-PLASTIC AND HYBRID SUCKER RODS EFFICIENCY. Oil and Gas Power Engineering, (2(28), 31–41. Retrieved from https://nge.nung.edu.ua/index.php/nge/article/view/437
Issue
Section
PHYSICAL-TECHNICAL PROBLEMS OF ENERGY CARRIERS RECOVERY
.png)
1.png){kind=logo}
