DEVELOPMENT OF THE COMPUTER-ORIENTED MODELS OF ELECTRICALLY DROVED MACHINES IN PETROLEUM INDUSTRY
Keywords:
2Abstract
The interdisciplinary approach for the programmed modeling of the energy characteristics of the complex electro-technical system in oil and gas industry is offered on the basis of the Bond Graph’s method and licensed program of the simulation 20-sim 3.6 07 Professional. The created computer oriented model of the electric drive aggregate due to which the starting regime of the electric engine was researched.
Downloads
Download data is not yet available.
References
1. Bishop R.H. The mechatronics hand book, The University of Texas at Austin // ISA – The Instrumentation, Systems and Automation Society, CRC Press, – Boca Raton, London, New York, Washington, D.C. – 2002. – 654 p.
2. Paynter H.M. Analysis and Design of Engi-neering Systems // The M.I.T. Press, Cambridge, Massachusetts. – 1961. – 268 p.
3. Rosenberg R.C., Karnopp D.C. Introduction to physical system dynamics // McGraw Hill, New York, NY. – 1983. – 176 p.
4. Кэрноп Д.С., Розенберг Р.С. Примене-ние теории графов связей в технике: Перевод с английского. – М.: Мир, 1974. – 94 с.
5. Wheeler H.A. and Dettinger D. Wheeler Monograph 9. – 1949. – 326 p.
6. Thoma, J.U. Simulation by Bondgraphs: Introduction to a Graphical Method // Springer-Verlag, Berlin, 1990.
7. Karnopp D.C., Margolis D.L. and Rosen-berg, R.C. System Dynamics: Modeling and Simu-lation of Mechatronic Systems // 3rd ed., John Wiley & Sons, New York, – 2000. pp. 36-52.
8. Granda J., Reus J. New Developments in Bond Graph modeling software tools: the computer aided modeling program CAMP-G and MATLAB // The 1997 IEEE International Conference on Systems, Man, and Cybernetics Hyatt Orlando, Orlando, Florida, USA – October 12-15 1997. pp. 42-68.
9. Amerongen J. van. Modelling, Simulation and Controller Design for Mechatronic Systems with 20-sim 3.0 // Cornelis J. Drebbel Research Institute for Systems Engineering and Control Laboratory, Electrical Engineering Department, University of Twente, – 2003. pp.68-75.
10. Amerongen J. van. Mechatronic design // Drebbel Research Institute for Systems Engineering and Control Laboratory, Faculty of Electrical Engineering, University of Twente, Mechatronics 13, – 2003. pp. 1045-1066.
11. Amerongen J. van, Breedveld P. Modelling of Physical Systems for the Design and Control of Mechatronic Systems // INFAC Professional Brief, published in relation to the 15th triennial INFAC World Congress, International Federation of Automatic Control, Laxenburg, Austria, – 2002. pp. 1-56 .
12. Breedveld P.C. Bond Graph-Physicals systems modeling: Fundamental concept // Institute for Mechatronics and Control Engineering Laboratory, Electrical Engineering Department, University of Twente, Netherlands, Summershool Bertinoro 7-11 July 2003.
2. Paynter H.M. Analysis and Design of Engi-neering Systems // The M.I.T. Press, Cambridge, Massachusetts. – 1961. – 268 p.
3. Rosenberg R.C., Karnopp D.C. Introduction to physical system dynamics // McGraw Hill, New York, NY. – 1983. – 176 p.
4. Кэрноп Д.С., Розенберг Р.С. Примене-ние теории графов связей в технике: Перевод с английского. – М.: Мир, 1974. – 94 с.
5. Wheeler H.A. and Dettinger D. Wheeler Monograph 9. – 1949. – 326 p.
6. Thoma, J.U. Simulation by Bondgraphs: Introduction to a Graphical Method // Springer-Verlag, Berlin, 1990.
7. Karnopp D.C., Margolis D.L. and Rosen-berg, R.C. System Dynamics: Modeling and Simu-lation of Mechatronic Systems // 3rd ed., John Wiley & Sons, New York, – 2000. pp. 36-52.
8. Granda J., Reus J. New Developments in Bond Graph modeling software tools: the computer aided modeling program CAMP-G and MATLAB // The 1997 IEEE International Conference on Systems, Man, and Cybernetics Hyatt Orlando, Orlando, Florida, USA – October 12-15 1997. pp. 42-68.
9. Amerongen J. van. Modelling, Simulation and Controller Design for Mechatronic Systems with 20-sim 3.0 // Cornelis J. Drebbel Research Institute for Systems Engineering and Control Laboratory, Electrical Engineering Department, University of Twente, – 2003. pp.68-75.
10. Amerongen J. van. Mechatronic design // Drebbel Research Institute for Systems Engineering and Control Laboratory, Faculty of Electrical Engineering, University of Twente, Mechatronics 13, – 2003. pp. 1045-1066.
11. Amerongen J. van, Breedveld P. Modelling of Physical Systems for the Design and Control of Mechatronic Systems // INFAC Professional Brief, published in relation to the 15th triennial INFAC World Congress, International Federation of Automatic Control, Laxenburg, Austria, – 2002. pp. 1-56 .
12. Breedveld P.C. Bond Graph-Physicals systems modeling: Fundamental concept // Institute for Mechatronics and Control Engineering Laboratory, Electrical Engineering Department, University of Twente, Netherlands, Summershool Bertinoro 7-11 July 2003.
Downloads
Published
26.06.2007
How to Cite
Костишин, В. С., & Курляк, П. О. (2007). DEVELOPMENT OF THE COMPUTER-ORIENTED MODELS OF ELECTRICALLY DROVED MACHINES IN PETROLEUM INDUSTRY. Oil and Gas Power Engineering, (1(2), 50–56. Retrieved from https://nge.nung.edu.ua/index.php/nge/article/view/88
Issue
Section
POWER ENGINEERING, CONTROL AND DIAGNOSTICS OF OIL AND GAS COMPLEX FACILITIES
.png)
1.png){kind=logo}
