THE PRACTICAL IMPLEMENTATION OF THE DEVELOPED METHOD OF CONTACTLESS ULTRASONIC WALL THICKNESS OF THE GAS IN THE PROCESS OF IN-LINE INSPECTION OF GAS PIPELINES

Authors

  • Т. Т. Котурбаш ІФНТУНГ ; 76019, м . Івано - Франківськ , вул . Карпатська , 15; тел . (03422) 42002
  • М. О. Карпаш ІФНТУНГ ; 76019, м . Івано - Франківськ , вул . Карпатська , 15; тел . (03422) 42002

Keywords:

technical diagnosys, intelligent pig, main pipeline, gascoupled ultrasonic inspection

Abstract

The problem of ensuring safety and security of supply of natural gas pipelines is becoming increasingly important because of the considerable degree of wear and tear of equipment of the domestic oil and gas industry. Preventive measures will significantly increase the security of pipelines and reduce the risk of dangerous situations. Conducting of in-line technical diagnostics is included in one of two required core competency processes in, Pipeline Integrity Management Systems (PIMS), which is the basis of interstate standard GOST CEN/TC 15 173. The article presents the main results of experimental studies and the ways of practical realization of the developed method of non-contact ultrasonic inspection of pipeline wall thickness in the in-line inspection of gas pipelines, by improving existing means of in-line inspection. Lack of regulatory support for in-line inspection in Ukraine leads to ambiguity about the requirements for regular technical inspection of the existing pipelines and creates significant challenges and uncertainties for the development of methodologies for in-line inspection and evaluation of its results. The basic approach for the design and the typical structure of such documents in accordance with the requirements of security in the oil and gas industry and the requirements of Standard CEN/TS 15173 has been proposed.

References

1 Осташ О. П. Технічна діагностика і ресурс конструкцій після довготривалої експлуатації / О.П. Осташ, В.М. Учанін, І.М. Андрейко, І.Р. Маковійчук. // Фізичні методи та засоби контролю середовищ, матеріалів та виробів. – 1999. – Вип. 4. – С. 3–8.
2 Мазур И.И. Безопасность трубопроводных систем / И.И. Мазур, О. М. Иванцов. – М.: ИЦ “ЕЛИМА”, 2004. – 1104 с.
3 Natural gas transmission pipelines pipeline integrity prevention, detection & mitigation practices. Topical Report GRI-00/0193. – Gas Research Institute, 2000. – 161p.
4 Gas supply systems - Frame of reference regarding Pipeline Integrity Management System (PIMS) (CEN 15173:2006) [Чинний від 01.06.2006]. – CEN/TC 234 Gassupply, 2006. –28 p.
5 MFL Technology for Natural Gas Pipeline Inspection, GRI Topical Report GRI-98/0367 / Bubenik, T.A., Nestleroth, J.B., Eiber, R.J. – Gas
Research Institute, 1998
6 Albert Teitsma. Technical Assessment Report Technology Assessment For Delivery Reliability For Natural Gas. – Gas Technology
Institute, 2004.
7 Albert Teitsma. Technology assessment for delivery reliability for natural gas – inspection technologies – Technical report, DOE No. DE-FC26-02NT41647, Pipeline Inspection Technology, Gas Technology Institute Des Plaines, IL, 2004.
8 Инструкция по диагностированию технического состояния подземных стальних газопроводов: РД 12-411-01 : 2001. – М.: Федеральный горный и промышленный надзор России (Госгортехнадзор России), 2002. – 49 с.
9 Experimental setup for air coupled ultrasonic hardware thickness control / Karpash O.M., D Rybitsky I.V., Karpash M.O., Koturbash T.T. // “Дни на безразрушителния контрол 2011” Материалы XXVI Международной конференции “Дефектоскопия’11”. – Болгария. – 2011
10 H. Lei, Z. Ultrasonic Pig for Submarine Oil Pipeline Corrosion Inspection / H. Lei, Z. Huang, W. Liang, Y. Mao. // Russian Journal of Nondestructive Testing. – 2009. – Vol. 45, No. 4. – pp. 285–291.
11 Розроблення методу безконтактного акустичного контролю геометричних параметрів зварних з’єднань / О.М. Карпаш, Т.Т. Котурбаш, М.О. Карпаш, І.В. Рибіцький, Я.І. Коман // Методи та прилади контролю якості. – 2010. – № 24. – С. 9 – 12.
12 A new generation of Ultrasonic In-Line Inspection Tools for Detecting, Sizing and Locating Metal Loss and Cracks in Transmission pipelines / K. Reber, M. Beller, H. Willems, and O. A. Barbian// 2002 IEEE Ultrasonics Symposium. – 2003. – 671p.
13 Карпаш М.О. Оцінка втрат енергії акустичних коливань за ультразвукового контролю в середовищі природного газу / М.О. Карпаш, Т.Т. Котурбаш // Фізико-хімічна механіка метеріалів. – 2011. – №6. – С. 122-128
14 Котурбаш Т.Т. Експериментальна перевірка безконтактного ультразвукового контролю товщини стінки газопроводів при внутрішньо трубній діагностиці / Т.Т. Котурбаш, М.О. Карпаш, І.В. Рибіцький. – Міжнародна науково-технічна конференція “Проблеми і перспективи транспортування нафти і газу”, ІФНТУНГ, 15-18 травня 2012 р. – Івано-Франківськ: ІФНТУНГ, 2012.
15 Експериментальна установка для безконтактного акустичного контролю елементів металоконструкцій після корозійного пошкодження / О.М. Карпаш, Т.Т. Котурбаш, І.В. Рибіцький та ін. // Проблеми корозії та протикорозійного захисту матеріалів: В 2-х т., Спецвипуск журналу «Фізико-хімічна механіка матеріалів». – Львів: Фізико-механчний інститут ім. Г.В. Карпенка НАН України, 2010 – №8, Т. 2. –
С. 531-535.
16 Основи метрології та вимірювальної техніки: підручник / М. Дорожовець, В. Мотало, Б. Стадник, В. Василюк, А. Ковальчик; за ред. Б. Стадника. – Львів: Видавництво Національного університету „Львівська політехніка”, 2005. – 532 с.

Published

05.05.2012

How to Cite

Котурбаш, Т. Т., & Карпаш, М. О. (2012). THE PRACTICAL IMPLEMENTATION OF THE DEVELOPED METHOD OF CONTACTLESS ULTRASONIC WALL THICKNESS OF THE GAS IN THE PROCESS OF IN-LINE INSPECTION OF GAS PIPELINES. Oil and Gas Power Engineering, (1(17), 83–91. Retrieved from https://nge.nung.edu.ua/index.php/nge/article/view/40

Issue

Section

POWER ENGINEERING, CONTROL AND DIAGNOSTICS OF OIL AND GAS COMPLEX FACILITIES

Most read articles by the same author(s)