ПРУЖНО-ДЕФОРМОВАНИЙ СТАН МУФТОВОГО З’ЄДНАННЯ ОБСАДНИХ ТРУБ З ГЕРМЕТИЗУЮЧИМ ЕЛЕМЕНТОМ У ВИСОКОТЕМПЕРАТУРНИХ СВЕРДЛОВИНАХ

Authors

  • В. М. Яворський ГПУ "Львівгазвидобування", 79044, м. Львів, вул. Газопромислова, 8, тел. (03222) 87717
  • М. Є. Чернова ІФНТУНГ; 76019, м. Івано-Франківськ, вул. Карпатська, 15; тел. (03422) 48090
  • Б. О. Чернов ІФНТУНГ; 76019, м. Івано-Франківськ, вул. Карпатська, 15; тел. (03422) 48090

Keywords:

2

Abstract

During the casing operation under the conditions of the increased temperature and pressure, the elements of the clutch coupling are effected by great static and dynamic stresses, thermal cyclic loadings that lead to the elastic and plastic deformations of the section of the coupling, pipes and sealing elements that influence the hermiticity and the endurance of the casing and heat flow pipes.

The structure of the highly– hermetic threaded casing joint with the sealing element has been suggested. The analytical dependences for the estimation of the deformation magnitude that appear on the tapered surfaces of the sealing element and coupling under internal contact pressure and temperature have been received. The maximum safe contact pressures in the unit of the joint sealing have been determined. The results of the experimental investigation that proved the high hermeticity of the casing with the suggested clutch coupling have been introduced.

References

1 ГОСТ 632-80 Трубы обсадные и муфты к ним: Технические условия. – М.: Госстандарт, 1980. – 66 с.
2 А.С. №1663174А1, СССР, МКИ Е 21 В 17/02, 17/042, F. 16L 15/00. Резьбовое соедине-ние теплонагнетательных труб. / Б.А. Чернов, И.С.Бабюк, К.А. Оганов, Я.Б. Чернов – № 4498291/03, заявл. 01.08.88, опубл. 15.07.91, Бюл. №26.
3 Чернов Б.О., Кулинин Т.М., Палійчук І.І. Деформації елементів муфтового з’єднання об-садних труб з герметизуючою втулкою // Роз-відка та розробка нафтових і газових родовищ. – 2002. – № 4(5). – С. 56-60.
4 Тимошенко С.П., Вейновський-Кригер С. Пластинки и оболонки. – М.: Наука, 1961 – 636 с.
5 Палійчук І.І., Кулинин Т.М.. Пружно-деформований стан тонкостінного герметизую-чого елемента муфтових різьбових з’єднань об-садних і насосно-компресорних труб // Розвідка та розробка нафтових і газових родовищ. – 2002. – № 3(4)-С.73-78.

Published

04.07.2008

How to Cite

Яворський, В. М., Чернова, М. Є., & Чернов, Б. О. (2008). ПРУЖНО-ДЕФОРМОВАНИЙ СТАН МУФТОВОГО З’ЄДНАННЯ ОБСАДНИХ ТРУБ З ГЕРМЕТИЗУЮЧИМ ЕЛЕМЕНТОМ У ВИСОКОТЕМПЕРАТУРНИХ СВЕРДЛОВИНАХ. Oil and Gas Power Engineering, (1(10), 41–44. Retrieved from https://nge.nung.edu.ua/index.php/nge/article/view/281

Issue

Section

PHYSICAL-TECHNICAL PROBLEMS OF ENERGY CARRIERS RECOVERY