PROCESS AUTOMATION OF APPLICATION OF THE ANTICORROSIVE COATING ON A PIPELINE

Authors

  • Б. В. Копей ІФНТУНГ ; 76019, м . Івано - Франківськ , вул . Карпатська , 15; тел . (03422) 40534
  • Т. П. Венгринюк ІФНТУНГ ; 76019, м . Івано - Франківськ , вул . Карпатська , 15; тел . (03422) 40534

Keywords:

Process automation, polymeric-composite bracer

Abstract

The task of  process automation of application of the anticorrosive coating on a pipeline, which now is not enough learned is resolved in this article. The automated device for winding of polymeric-composite bracer on a pipe, in which this task decides due to introduction of automated elektrodrive of the band pull mechanism and feed-backs with the sensors of current status of pull of the winded off roll of material of ribbon, which provide a signal about current status of radius of roll, is developed in the Ivano-Frankivsk national technical university of oil and gas, which is given on the automated control system by an engine. Due to the automated adjusting by the technical process of insulating tape with polymeric composite application on a pipe, the necessary pull of isolating coating and closeness of adjoining on all surface of pipe is achieved,, that will provide durability of adhezive joint of coating with the surface of metal, high performance properties of coating  and will multiply the time of exploitation of main pipelines.

References

1 Киямов Р.Н., Агиней Р.В. Повышение достоверности определения площади повреждений антикоррозионных покрытий. Научно-техн. конф. молодежи ОАО «Се-верные МН», Ухта 21-23 ноября 2006 г. Материалы конференции: Ухтинский гос.техн.ун-т. - С. 44-45.
2 Середницький Я.А. Сучасна протикорозійна ізоляція в трубопровідному транспорті
(1-ша частина) / Середницький Я.А. – Львів: ПТВФ «Афіша», 1999. - С. 6-7.
3 Трубопроводи сталеві магістральні. Загальні вимоги до захисту від корозії: ДСТУ 4219-2003. – [Чинний від 2003-09-15]. – К..: Держспоживстандарт України, 2003. - 69 с. – (Національний стандарт України).
4 Середницкий Я.А., Банахевич Ю.В., Драгилев А.В. Справочник «Противокоррозионная изоляция магистральных газонефтепроводов» / ДК «Укртрансгаз», Физико-механ. ин-т им. Г.В.Карпенко НАМ Украины, Орган по сертификации противокоррозионных изоляционных покрытий трубопроводов «УкрСЕПРОтрубоизол», ЧП «Инжиниринговые технологии». – Киев-Львов. – 2008. – С. 305-313.
5 Пат. 2315225 Российская Федерация. МПК F16L 58/02. Способ нанесения на трубопровод изолирующей ленты [Текст] / Гуслиц В.М., Велиюлин И.И.; заявитель и патентообладатель ОАО Газпром. - № 2005106917/06; заявл. 15.03.2005; опубл. 20.01.08.
6 Пат. 2313720 Российская Федерация. МПК F16L 58/00. Способ нанесения полимерного покрытия на стальные трубопроводы [Текст] / Сазонов П.М., Рябов В.М., Бухарин И.А., Юруш А.С., Носова М.Ф.; заявитель и патентообладатель ЗАО Терма, ОООУрол. – Трансгаз. - № 2005140458/06; заявл. 23.12.2005; опубл. 27.12.07.

Published

18.09.2009

How to Cite

Копей, Б. В., & Венгринюк, Т. П. (2009). PROCESS AUTOMATION OF APPLICATION OF THE ANTICORROSIVE COATING ON A PIPELINE. Oil and Gas Power Engineering, (2(11), 25–28. Retrieved from https://nge.nung.edu.ua/index.php/nge/article/view/205

Issue

Section

PHYSICAL AND TECHNICAL PROBLEMS OF ENERGY CARRIERS TRANSPORTATION STORAGE

Most read articles by the same author(s)

1 2 3 > >>