The calculations method of the contact pressure for the coupling and pipe connected with the tightness

Authors

  • Є. І. Крижанівский ІФНТУНГ, 76019, м. Івано-Франківськ, вул. Карпатська, 15, тел. (03422) 42264
  • І. І. Палійчук ІФНТУНГ, 76019, м. Івано-Франківськ, вул. Карпатська, 15, тел. (03422) 42264

Keywords:

2

Abstract

The balance conditions for the contact pressures and for the deformations and tightness are mathe­matically formulated and based on the physical mechanism of the elastic interaction of the pipes and coup­lings contact sections. The elaborated principles take into account the annular, radial and axial walls deformations at the same time and enable to give the calculation of the deformation and power parameters of the thick-walled sections of the pipe joint, since use the Lame equation and the moment theory of the cylinders stress.

References

1 Палійчук І.І. Пружна взаємодія з’єд¬наних з натягом циліндрів із змінною товщиною стін-ки // Розвідка та розробка нафтових і газових родовищ. – 2006. – № 2 (19). – С.59-63.
2 Бронштейн И.Н., Семендяев К.А. Спра-вочник по математике. – М.: Гостехиздат, 1953. – 608 с.
3 Пономарев С.Д., Бидерман В.Л. и др. Расчеты на прочность в машиностроении / Под ред. С.Д.Пономарева. – М.: Машгиз, 1958. – Т.2. – 974 с.
4 Еременко Т.Е., Мочернюк Д.Ю., Тищен-ко А.В. Герметизация резьбовых соединений обсадных колонн нефтяных и газовых скважин. – К.: Техніка, 1967. – 170 с.

Published

28.06.2008

How to Cite

Крижанівский, Є. І., & Палійчук, І. І. (2008). The calculations method of the contact pressure for the coupling and pipe connected with the tightness. Oil and Gas Power Engineering, (1(6), 78–82. Retrieved from https://nge.nung.edu.ua/index.php/nge/article/view/143

Issue

Section

SCIENCE AND MODERN TECHNOLOGIES